configuration-manager.de - Configuration Manager

Wie muss ich Treiber auf Linux Installieren?

Frage von : Wie muss ich Treiber auf Linux Installieren?
Ich benutzte openSuse und Windows, ich würde auch mal gerne auf Linux umsteigen.
Dies fällt mir aber sehr schwer, weil openSuse Das Lan-Kabel nicht erkennt (Ubuntu kann das).
Jetzt habe ich die Treiber für meinen W-Lan Sticke heruntergeladen aber komme einfach nicht nach, was ich laut diesem ReadMe tun muss um ihn zu insallieren.

* README
*
* Ralink Tech Inc.
*
* http://www.ralinktech.com
*

=======================================================================
ModelName:
===========
RT2870 Wireless Lan Linux Driver

=======================================================================
Driver lName:
===========
rt2870.o/rt2870.ko

=======================================================================
Supporting Kernel:
===================
linux kernel 2.4 and 2.6 series.
Tested in Redhat 7.3 or later.

=======================================================================
Ralink Hardware:
===================
Ralink 802.11n Wireless LAN Card.

=======================================================================
Description:
=============
This is a linux device driver for Ralink RT2870 USB ABGN WLAN Card.

=======================================================================
Contents:
=============
Makefile : Makefile
*.c: c files
*.h: header files

=======================================================================
Features:
==========
This driver implements basic IEEE802.11. Infrastructure and adhoc mode with
open or shared or WPA-PSK or WPA2-PSK authentication method.
NONE, WEP, TKIP and AES encryption.

=======================================================================
Build Instructions:
====================

1> $ tar -xvzf DPB_RT2870_Linux_STA_x.x.x.x.tgz
go to “./DPB_RT2870_Linux_STA_x.x.x.x” directory.

2> In Makefile
set the “MODE = STA” in Makefile and chose the TARGET to Linux by set “TARGET = LINUX”
define the linux kernel source include file path LINUX_SRC
modify to meet your need.

3> In os/linux/config.mk
define the GCC and LD of the target machine
define the compiler flags CFLAGS
modify to meet your need.
** Build for being controlled by NetworkManager
Please set ‘HAS_WPA_SUPPLICANT=y’ and ‘HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y’.
** Build for being controlled by WpaSupplicant with Ralink Custom Event
Please set ‘HAS_WPA_SUPPLICANT=y’ and ‘HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n’.
command: #./wpa_supplicant -Dralink -ira0 -c wpa_supplicant.conf -d

4> $ make# compile driver source code

5> $ cp RT2870STA.dat /etc/Wireless/RT2870STA/RT2870STA.dat

6> load driver, go to “os/linux/” directory.
#[kernel 2.4]
# $ /sbin/insmod rt2870sta.o
# $ /sbin/ifconfig ra0 inet YOUR_IP up

#[kernel 2.6]
# $ /sbin/insmod rt2870sta.ko
# $ /sbin/ifconfig ra0 inet YOUR_IP up

7> unload driver
$ /sbin/ifconfig ra0 down
$ /sbin/rmmod rt2870sta

=======================================================================
CONFIGURATION:
====================
RT2870 driver can be configured via following interfaces,
i.e. (i)”iwconfig” command, (ii)”iwpriv” command, (iii) configuration file

i) iwconfig comes with kernel.
ii) iwpriv usage, please refer to file “iwpriv_usage.txt” for details.
iii)modify configuration file “RT2870STA.dat” in /etc/Wireless/RT2870STA/RT2870STA.dat.

Configuration File : RT2870STA.dat
—————————————
# Copy this file to /etc/Wireless/RT2870STA/RT2870STA.dat
# This file is a binary file and will be read on loading rt.o module.
#
# Use “vi RT2870STA.dat” to modify settings according to your need.
#
# 1.) set NetworkType to “Adhoc” for using Adhoc-mode, otherwise using Infrastructure
# 2.) set Channel to “0″ for auto-select on Infrastructure mode
# 3.) set SSID for connecting to your Accss-point.
# 4.) AuthMode can be “WEPAUTO”, “OPEN”, “SHARED”, “WPAPSK”, “WPA2PSK”, “WPANONE”
# 5.) EncrypType can be “NONE”, “WEP”, “TKIP”, “AES”
# for more information refer to the Readme file.
#
#The word of “Default” must not be removed
Default
CountryRegion=5
CountryRegionABand=7
CountryCode=
SSID=Dennis2860AP
NetworkType=Infra
WirelessMode=9
Channel=0
usw……

Beste Antwort:

Answer by John D
Wenn so ein Zirkus für Windows erforderlich wäre, würde Bill Gates heute noch in einer Garage hausen … Linux-User sind halt Masochisten …

Antworten Sie selbst in den Kommentaren!

Tags: Installieren, Linux, muss, Treiber

Xing

Teilen

16.Jun.11 Configuration manager Kommentare (0)